Lesson Plan-Transport engineering-II

Back

Lesson Plan

Discipline: civil Engineering
Semester: 6th
Subject : Transport engineering-II
Lesson Plan Duration
Theory Practical
Week Lec day Topic Pract. day Topic
UNIT-I-Design of Flexible Pavements 1 aggregate impact test
1st 1 Introduction 2 los-angeles abrasion test
2 Types of pavements. Flexible and rigid pavement 3 Dorry’s abrasion test on aggregate
3 Components of a pavement and their functions. 4 Deval attrition test on aggregates
4 Factors affecting design of pavements. 5 crushing strength test on aggregate
2nd 5 Design of thickness of a flexible pavement by Group Index method 6 penetration test on bitumen
6 Design of thickness of a flexible pavement by Group Index method (Cont.) 7 ductile test on bitumen
7 CBR method (including latest IRC guidelines), 8 viscosity test on bitumen material
8 Triaxial method 9 softening point on bitumen
3rd 9 Burmister’s method 10 flash and fire  point on bitumen
10 test/assignment
Unit-II Design of Rigid Pavements
11 Westergaard’s theory, critical locations of loading,
4th 12 Load and temperature stresses.
13 Critical combination of stresses. IRC guidelines for determination of thickness of a rigid pavement.
14 Joints: requirements, types, patterns
15 Spacing of expansion and contraction joints.
5th 16 test/assignment
Unit-III-Highway Construction: Non-Bituminous Pavements
17 Brief introduction to earthwork machinery: shovel, hoe, clamshell, dragline, bulldozers.
18 Principles of field compaction of sub grade. Compacting equipments. Granular roads.
19 Construction steps of WBM. WMM.
20 Construction of cement concrete pavements, Slip-form pavers,
6th 21 Basic concepts of the following: soil stabilized roads, use of geo-synthetics,
22 reinforced cement concrete pavements, prestress concrete pavements,
23 Roller compacted concrete pavements and fibre reinforced concrete pavements.
24 test/assignment
7th Unit-IV Construction of Bituminous Pavements
25 Various types of bituminous constructions. Prime coat,
26  tack coat, seal coat and surface dressing.
27 Construction of BUSG, Premix carpet,
28  BM, DBM and AC.
8th 29 Brief coverage of machinery for construction of bituminous roads:
30 Bitumen boiler, sprayer, pressure distributor, hot-mix plant,
31 Cold mix plant, tipper trucks, mechanical paver or finisher, rollers. Mastic asphalt.
9th 32 Introduction to various IRC and MOST specifications.
33 test/assignment
Unit-V Highway Maintenance
34 Pavement failures. Maintenance operations.
35 Maintenance of WBM, bituminous surfaces
10th 36  cement concrete pavements.
37 Pavement evaluation. Benkleman beam.
38 Introduction to various types of overlays.
39 test/assignment
Unit-VI Highway Drainage and Hill Roads
40 Surface drainage: types, brief design.
11th 41 Types of sub-surface drainage.
42 Special characteristics of hill roads: geometric, hair pin bends,
43 Construction of hill roads, drainage of hill roads, maintenance problems of hill roads.
44 test/assignment
Unit-VII Highway Economics and Finance
12th 45 Need of economic evaluation. Highway user benefits and costs.
46 Methods of economic evaluation: benefit cost ratio method,
47 Net present value method, internal rate of return method, comparison. Highway finance.
48 test/assignment
Unit-VIII-Tunnels
13th 49 Sections of tunnels: advantages, limitations and suitability of each section.
50 Shaft. Pilot tunnel. Driving tunnel in rocks: sequence of construction operations,
51 full-face method, heading and bench method,
52 Drift method. Driving tunnels in soft ground
14th 53 sequence of construction operations
54 Needle beam method, shield tunneling, compressed air tunneling.
55 test/assignment
56 REVISION
15th 57 REVISION
58 REVISION
59 REVISION